lightweight adhesive planned for electric vehicle

Lightweight adhesive needed in the USA electric vehicle development

As the automotive industry has been striving for environmentally friendly vehicles for several decades, demand for new types of adhesives grows. We were recently contacted by an electric vehicle developer that enquired about a lightweight adhesive for a prototype. This US based manufacturer is working on a prototype of an electric vehicle which aims at being exceptional due to its extremely light weight. In order to reduce weight as much as possible, a lightweight adhesive that bonds lightweight materials was needed.

Specifications to define the best lightweight adhesive

In order to find the best possible lightweight adhesive system for the specific application, we needed some additional information on the specifications. After having learned that the adhesive must be both lightweight and able to bond lightweight materials we were provided with more specifications. The adhesive should be fast curing in order to prepare for possible fast paced mass production as well as supporting the use of more and more lightweight materials such as composites, honeycomb panels and PUR foam.

Thanks to recent developments in the automotive adhesives sector, we knew just the adhesive that would provide the perfect results in this application.

Solution: new fast curing chemistry

Not too long ago a chemistry known from fast curing coatings was successfully adopted to formulate adhesives that cure extremely fast and are lightweight. This revolutionary bonding technology relies on polyurea and it has reached North America.

Polyurea adhesives cure in a matter of seconds, are lightweight and require less adhesive for strong bonds than comparable structural adhesives. We shared this information with the US based electric vehicle developer, and they were very positive about the properties. Currently, the polyurea manufacturer and the vehicle developer are in contact in order to define whether polyureas is the right lightweight adhesive for the application.

Get connected through AdhesivePlatform

Whether you are seeking adhesives for your new products, looking to challenge your current suppliers or willing to boost production efficiency with another adhesive, we are here to help! AdhesivePlatform offers personal assistance in finding the perfect bonding and sealing solutions for any application. Send us your enquiry about lightweight adhesive, or any other glue or sealant, and let us take on the challenge.


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

seams of a jacket sealed with bio-based textile tape

Bio-based textile tape for sealing seams in outdoor clothing

Sustainability plays an ever-greater role in many industries, also in clothing production as bio-based textiles are becoming more common. We were recently approached by an outdoor clothing manufacturer who was looking for a waterproof and bio-based textile tape to seal seams of outdoor clothing.

The bio-based textile tape had to be made of natural materials and preferably include a biodegradable clothing adhesive. Furthermore, the tape had to be waterproof in order to seal the seams. Despite the rather clear enquiry, we decided to ask for some more specifications, which allowed us to connect the clothing manufacturer with the best possible bio tape solution.

Bio-based textiles tape specifications

After asking for more information regarding the needed tape system and bio-based textiles, we knew we were looking for a waterproof, bio-based textile tape with a clothing adhesive that is activated by heat and/or pressure. The material the tape should adhere to was oil treated cotton, and the application was likely to be manual or semi automatic.

With this information we could narrow down possible bio-based textiles tape suppliers, and started to contact different companies within our network. The possible solutions ranged from biodegradable pressure sensitive adhesive to modified medical tape for surgical drapes.

From bio tape samples, testing and prototypes towards placing an order

Having weighed the options we decided to introduce the bio tape enquiry to a couple of potential suppliers of bio-based textile tape. It turned out, only one of them was able to provide a solution to the problem of the outdoor clothing manufacturer.

This textile tape supplier was introduced to the clothing manufacturer, and they are currently discussing samples, testing and prototypes in order to confirm compatibility of the clothinng adhesive, bio tape and cotton. Once the compatibility and performance have been assessed and confirmed, an order can be placed.

Looking for a solution for your project or product?

At AdhesivePlatfotm we are dedicated to connecting supply and demand in the adhesives and sealants industry. Are you in need of a glue, sealant or tape? Contact us and find out which solution best suits your needs.


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

construction product installed using automated adhesive application equipment

Construction product manufacturer seeks automated adhesive application equipment

Most of the time we are approached by companies that need an adhesive system. However, sometimes, the adhesive system already exists, but the application method and equipment are yet to be defined. Recently, we were contacted by a construction product manufacturer that is willing to improve their products and enhance production. In order to do so, they require automated adhesive application equipment to replace the currently used manual system.

As our network does not include many application machinery manufacturers, we have not been able to connect this enquiry yet. Nevertheless, we are continuously looking for possible solutions and suppliers. We are also interested in any tips and suggestions!

What is required from the automatic adhesive application equipment

The current construction product of the company has European fire rating B-s1, d0 and it is not suitable for use on high-rise buildings which exceed a certain height. Therefore, the company has designed a new, similar product which has a better fire rating of A2-s1, d0, which allows applications in taller buildings.

The adhesive is a construction epoxy which needs to be applied to the construction product without exceeding the maximum calorific value per square meter. The automated application equipment must also allow for precise application and specific patterns. Most importantly, the purpose of the automatic adhesive application equipment is to increase the production efficiency allowing for a larger number of products made in a short period of time. Contact us to get more detailed information on the enquiry.

Looking for a solution – Do you have one?

As we have not yet been able to connect this enquiry with an adhesive application machinery supplier, we are open for any suggestions. Do not hesitate to contact us if your company is interested in providing the application equipment for the construction product manufacturer!


Contact us

Are you an adhesive application equipment manufacturer?

Our extensive network consists of international adhesive and sealant specialists, however, it does not include many machinery and equipment manufacturers. If you are interested in promoting your equipment and machinery through AdhesivePlatform, and expanding your reach to new clients, contact us to start cooperation with AdhesivePlatform. We are always happy to extend our network!

food packaging needs biodegradable lid film and adhesive

Bioplastic food packaging manufacturer looks for biodegradable lid film and adhesive

Through adhesives+coatings we connect supply and demand in the adhesives and sealants industry. Usually we have the supply but lack demand, however, it can also go the other way around. We were recently contacted by a food packaging manufacturer that specializes in biodegradable packaging, and is looking for a two layered biodegradable lid film and adhesive for their bioplastic packaging.

Despite our extensive network, we have not yet been able to connect this enquiry to a supplier. We are, nonetheless, continuously looking for a solution and are open to any suggestions!

FDA approved and biodegradable lid film with adhesive

food container with biodegradable lid film and adhesive
The packaging manufacturer is looking for a biodegradable lid film and adhesive for their sustainable food boxes.

The packaging manufacturer specializes in food packaging made of PLA foam. These products also require a lid that seals the packaging. Therefore, the company is looking for a two layered lid film that is glued to the packaging and is safe for food contact. The film and adhesive also must be biodegradable in order for the company to produce 100% biodegradable food packaging. Consequently, it is crucial for the biodegradable lid film and adhesive to be FDA certified.

Two solutions to help out the biodegradable packaging manufacturer

The biofoam packaging manufacturer is initially looking for a combination of lid film and adhesive. However, it is also possible to supply a biodegradable adhesive polymer which they can use to make the lid film. Both of the possible solutions are tied to some requirements in addition to biodegradability and food safety.

1. Biodegradable lid film with adhesive

The two layered biodegradable film should be made of PBAT, PBS or blends of these two. The possible application methods include T-die and blowing process. The lid film must be transparent and easy to peel off the packaging. The bottom layer of the biodegradable packaging must allow for heat sealing.

As our network does not yet include a manufacturer that offers such a solution, we are open for ideas! Do not hesitate to contact us in case your company could provide a biodegradable lid film and adhesive combination for a large volume (repreated) order.

2. Biodegradable adhesive polymer

The packaging manufacturer would preferably be supplied the combination of biodegradable lid film and adhesive. However, a biopolymer based adhesive polymer would also help solve the problem. Next to food safety and biodegradability, the adhesive polymer should be processible by T-die or blowing process by extrusion. The adhesive polymer would be used to make the lid film domestically.

If you have a suggestion about a suitable adhesive polymer, please help us out!

Do you have the solution?

Adhesives+coatings brings supply to demand, and vice versa, in the adhesives and sealants industry. In this case we have the demand but miss the supply: all suggestions are appreciated!

In case your company is producing biodegradable, food safe film and/or adhesive that could be used as lid film for food packaging, let us know! We would also appreciate any tips on biopolymer based adhesive polymers. Hit the button below to contact us, and help out the packaging manufacturer.


Contact us

Interested in our concept?

Lately we have noticed an increase in the interest towards compostable and biodegradable adhesive systems and receive more and more inquiries about these solutions. Are you an adhesive manufacturer with a range of biodegradable and compostable products, and would you like to broaden your reach to new clients through adhesivesandcoatings.com? Contact us and start the process of becoming our partner. We are always happy to extend our network!

compostable stickers used for closing a paper bag

Looking for compostable stickers and glue for paper bags

Despite our extensive network, it sometimes happens that none of our partners can provide a solution to an enquiry. One such case occurred when a paper bag manufacturer approached us to enquire about 100% compostable stickers and glue.

Our network includes several compostable and biodegradable adhesive manufacturers, however, the combination of sticker and glue could not be provided. We are, nevertheless, not ready to give up and are continuously looking for a suitable solution. We are open for any suggestions!

Project description, requirements and possible solutions

The increased importance of environmentally friendliness and sustainable waste management calls for innovative solutions, also in the paper bag industry. In this case the solution should be designed to close full paper bags. The requirements tied to the stickers and adhesives include compostability under industrial or domestic compost circumstances and strength to keep the bags closed.

Even though the company originally requested for compostable stickers, other options may be applicable. The point is that whatever the solution may be, it can be used to close compostable paper bags, and keep them closed for several days.The solution could be:

  • Separately supplied compostable labels and pressure sensitive adhesive
  • Compostable stickers which stick thanks to compostable glue
  • Compostable tape (single or double sided)
  • Remoistenable glues made of compostable materials
  • Compostable sealer strip with a liner
  • Other innovative solutions. Please, share, if you have one.

Do you have a solution – compostable stickers or labels?

Adhesives+coatings connects supply and demand in the adhesives and sealants industry. In this case we have the demand but miss the supply: we are open for suggestions!

In case your company is producing compostable stickers or labels, or works with materials that could be converted into stickers, let us know. Better yet, if you are manufacturing 100% compostable stickers, including the adhesive, be sure to inform us and get connected!


Contact us

Interested in our concept?

Lately we have noticed an increase in the interest towards compostable and biodegradable adhesive systems and receive more and more enquiries about these solutions. Are you an adhesive manufacturer with a range of biodegradable and compostable products, and would you like to broaden your reach to new clients through adhesivesandcoatings? Contact us and start the process of becoming our partner. We are always happy to extend our network!

vehicle assembly using transport adhesive sealant

An indian vehicle manufacturer looks for a cost efficient adhesive sealant

An Indian vehicle manufacturer recently contacted us to enquire about a more cost efficient alternative to the adhesive sealant they are currently using to prevent air and water ingress in their vehicles. The currently used adhesive sealant performs at a satisfactory level, however, the costs are becoming unacceptable for the Indian manufacturer. Therefore, an alternative transport adhesive sealant was needed.

The currently used adhesive sealant

To make the switch between products as easy as possible for the Indian vehicle manufacturer, we needed some additional information on the current product and its characteristics. The company provided us with data indicating that the currently used product is a single component system which allows for primerless adhesion. Additionally this adhesive sealant is free of solvents and has good UV resistance.

As regards the application itself, the transport adhesive sealant is applied in order to bond metal to metal and seal the joints preventing air and water ingress. This and the aforementioned characteristics were considered when we looked for an alternative product and supplier within our network.

Finding an alternative transport adhesive sealant

As we received the information on the currently used transport adhesive sealant, we narrowed down the options to suitable suppliers and products. After contacting a manufacturer of transport adhesives sealants, which specializes in transport adhesive sealant systems, we decided to introduce the company to the Indian vehicle manufacturer.

Product details were exchanged and the two companies agreed on starting testing with one of the transport adhesive sealants. A sample was sent to India, so that the product could be tested on the actual materials. The adhesive sealant system in question is a one component system which can be applied using the same equipment as the currently used product. Finally, this product is slightly cheaper especially when ordered in large volumes. Curious for the solution? Contact us to find out which adhesive sealant solved the problem in India.

Curious for alternatives for adhesives and sealants in your process?

Are you looking for better,cheaper or more sustainable adhesives or sealants? In that case, contact us and let us search our extensive network for the most suitable alternatives in order to guarantee you the best products. Our experts are happy to take on challenges and help out businesses in need of adhesives and sealants!


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

copper and aluminum components bonded with metal to metal adhesive

Electronic component manufacturer needs a metal to metal adhesive in the US

We were recently contacted by a US manufacturer of electronic components who was looking for a metal to metal adhesive. The metal to metal glue was needed to form bonds between aluminum and copper allowing for resistance measurements.

There are many different types of metal glues, most of which are suitable for metal to metal bonding. However, in this case a metal to metal adhesive was needed to bond dissimilar surfaces. The adhesive, additionally, needed to have other special properties.

Metal to metal adhesive specifications

The initial enquiry needed specified by more information on the product and the specific application. The US based manufacturer informed us that they are looking for an easy and efficient to apply adhesive system, preferably a single component glue, which serves the needs of both aluminum and copper. In addition, the adhesive is ideally suitable for manual and automated applications to guarantee versatile use.

As the copper and aluminum surfaces were crucial for measuring resistance, the adhesive was required of a certain level of electrical conductivity. This narrowed down the possible adhesive suppliers.

Finding a copper to aluminum adhesive supplier

In order to connect the American component manufacturer with the most suitable adhesive supplier, we asked around within our network. Eventually, we concluded that two of the potential suppliers could offer a metal to metal adhesive solution that would meet the specified needs of the product.

We decided to introduce both adhesive suppliers to the electronic component manufacturer and leave the final decision up to them. The manufacturer shortly concluded that one of the options was more appealing than the other.

Proceeding towards placing an order

As the US based component manufacturer had been successfully connected with a metal glue manufacturer, it was time to move on towards placing an order. However, before that, both companies ran tests in the laboratories to confirm the compatibility and ideal functionality of the metal to metal adhesive and the materials that required bonding. The test results are currently being reviewed and an order is expected to be placed.

Are you in need of a metal adhesive?

Metal to metal bonding involving dissimilar metals can be tricky, especially when additional characteristics such as chemical resistance and heat resistance are needed. Do not hesitate to contact us if you need any assistance with choosing the best possible metal to metal adhesive for your product, project or process.


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

biodegradable wood panel glue australia in mdf

Biodegradable wood panel glue for a housing project in Australia

As sustainability and green adhesive solutions are the trend of today, we have been receiving an increased amount of enquiries for biodegradable and compostable solutions. The most recent enquiry comes from an Australian wood panel manufacturer, who is looking for a biodegradable wood panel glue for panels to be used in recyclable houses. The project is planned to take place in Australia.

We found the enquiry unusually interesting and were happy to take on the challenge. Biodegradability and compostability are not yet very common characteristics of wood panel glue, but the demand is certainly growing.

Strong, biodegradable, compostable…

Before starting to look for a suitable adhesive system and a supplier, we requested some additional details regarding the wood panels and the glue. It turned out the adhesive should form strong bonds, be biodegradable, preferably even compostable, and it should be easy to apply forming bonds when subject to heat and pressure. The solution should be a single component biodegradable wood panel glue.

With this information we approach several potential suppliers within our network. As anticipated, none of them could provide the solution that meets all the requirements (bonding strength and compostability) of the Australian company. We were not ready to give up, nonetheless.

Looking for a biodegradable wood panel glue for Australia

Despite the fact that none of the current members of our network is capable of providing a biodegradable wood panel glue at the moment, we keep looking for a solution. We came to an agreement with the Australian manufacturer to keep the enquiry open for further research on potential solutions. We recently started a cooperation together with a research institute and a university, both part of our network, to work towards a new kind of adhesive: one that meets all the requirements for the project in Australia.

Open for information

As AdhesivePlatform is dedicated to connecting supply and demand within the adhesives and sealants industry, we are determined to find a solution even for the most complex enquiries. Might you be able to help us out with finding a biodegradable wood panel adhesive, we are open for conversation. On the other hand, if you yourself have an enquiry, feel free to contact us.

To share information on biodegradable wood panel glue or to make an enquiry, hit the button below!


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

airport sealant for runway joints

A contractor seeks a sealant for airport project in Germany

A contractor who specializes in concrete and asphalt surfaces recently contacted us as they were looking for a sealant for a project at an airport in Germany. The contractor was responsible for concrete and asphalt on docks, loading and gate areas as well as taxiways, ramps and runway construction including take off and touch down zone. For this purpose, they needed a sealant that is suitable for joints between asphalt and concrete. Additionally, this airport sealant had to be extremely durable to decrease the need for joint maintenance.

Characteristics of the airport sealant needed in Germany

As airports usually require sealants that are chemical and abrasion resistant as well as have an excellent load bearing capacity, also the German contractor enquired about a similar system. However, as expansion joints between asphalt, concrete and asphaltic concrete needed to be filled and sealed, the sealant options were limited.

In order to connect the contractor with the best possible sealant supplier, we needed more detailed information on the planned application methods and the service environment of the sealant regarding present chemicals, estimated level of traffic as well as expected temperature extremes and fluctuation. Additionally, the German contractor informed us that they would prefer an environmentally friendly solution.

The solution: MS polymer as an airport sealant

After having received the aforementioned information on the project and product requirements, we started to look for a potential sealant supplier within our network. The search did not take long: our partner, an adhesive and sealant manufacturer, specializes in solutions for infrastructure, and had several products perfect for the joints at the airport in Germany. As the enquiry included several areas of the airport with different requirements, more than one sealant was needed.

We introduced the German contractor to the sealant supplier and both parties were positive that the sealants would do the job. As the expansion joints that needed sealing were between dissimilar materials that react differently to temperature changes, a special sealant was needed. The sealant supplier suggested MS polymer sealants, which are extremely durable but remain flexible allowing for movement without cracking. Also known for resistance to fuels, MS polymer sealants are environmentally friendly, as they do not contain any isocyanates, solvents or silicone.

Product delivery and technical support

The contractor and sealant exchanged project and product data and agreed on the suitability of the suggested sealants. An order was placed and the airport sealants were delivered to Germany where they were applied to the expansion joints by the contractor. The sealant supplier provided technical support to ensure no mistakes were made during application.

Get in touch with adhesive and sealant suppliers

AdhesivePlatform connects supply and demand in the adhesives and sealants industry: our experts are determined to find the best possible solution or any application. In case you are in need of an adhesive or sealant, contact us and experience the power of our global network of adhesive and sealant manufacturers.


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

adhesive for railcar vehicle seats applied to seats in a train in Australia

Safety increasing adhesive for seats in railcars for Australian company

An Australian vehicle seat manufacturer recently contacted us at AdhesivePlatform, and asked our assistance for finding an adhesive for railcar seats to be installed in a passenger train. The company was looking for an adhesive which bonds the seat upholstery in an efficient way and offers a sufficient level of chemical resistance as well as contributes to safety by being fire retardant.

The rail vehicle seats are designed to be easy to clean and comfortable, using a leather-like material as upholstery bonded to a foam filling. Additionally, the seats must contribute to fire safety on board. Thus, the Australian company needed a foam bonding adhesive resistant to specific cleaning chemicals. Additionally, the adhesive had to comply with and exceed fire safety regulations by fire retardant properties.

Fire resistant adhesive for rail vehicle seats in Australia

In order to introduce the Australian company to the best possible adhesive supplier, we asked them to provide us with more information on the project and adhesive specifications. After learning the required levels of fire retardancy and chemical resistance as well as preferred application method, curing time and further processing procedure of the seats we selected a foam bonding adhesive supplier in our network. The supplier offers a wide range of adhesives for transport vehicles and foam bonding, including adhesives for seats in passenger vehicles.

Our contact person in the adhesive company could immediately think of a suitable adhesive system for the Australian rail vehicles seats. Nevertheless, they still required more details on the materials, required adhesive and finished products. We introduced the two companies to each other, and they exchanged further details and identified the national and international standards the adhesive must comply with.

Testing and determining level of fire retardancy

Even a certified fire retardant adhesive must be tested on the actual materials to ensure the adhesive performs as wished in case of fire, and reaches the desired level of fire protection. At the moment the adhesive supplier and Australian rail vehicle seat manufacturer are agreeing on testing procedures. Once the adhesive has been tested with positive results, the two companies are moving towards order, product delivery and production.

Looking for a special adhesive or sealant?

In case you are looking for an innovative adhesive or sealant for your application, or are looking to challenge your current supplier, contact us and find out what the options are. Our experts are determined to find the best possible solution for any application.


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

hot melt body panel adhesive being applied to vehicle frame

German vehicle manufacturer in need of a hot melt body panel adhesive

The transport and vehicles industry is continuously challenged by the need for lighter, greener and more efficiently produced machines. A German transport vehicle manufacturer recently contacted us to enquire about body panel adhesives to produce lighter weight vehicles in an increased efficiency assembly line.

To increase efficiency the company is looking to switch to hot melt body panel adhesive. They are looking for a system that bonds dissimilar materials, as the weight reduction of vehicles involves metal to composite material bonds. In order to find the best system for the application, we at adhesives+coatings looked into our network of transport adhesive manufacturers.

Looking for a transport adhesive manufacturer for German company

After having found the most suitable hot melt body panel adhesive manufacturer, we contacted the company in Germany with some further questions to confirm the match. They provided us with detailed information on the characteristics and bonding needs of the metal and composite material. Additionally, they shared the required adhesive specifications regarding melting point, curing time and temperature.

We passed on the information to the potential hot melt adhesive supplier and got a positive response: their hot melt body panel adhesive seemed to fit the needs of the German manufacturer. We introduced these two companies to each other to further evaluate possibilities for cooperation.

Adhesive testing and technical support in Germany

In order to make sure the hot melt adhesive delivers satisfactory results, some tests needed to be run on the actual materials. The German manufacturer wished to invest in a hotmelt adhesive application system, but not before the best adhesive was determined. Therefore the initial testing on the metal and composite material was carried out in the laboratory of the adhesive supplier.

The tests showed positive results concerning the curing process (time and temperature) as well as strength of the bonds when applied to the specific materials. The German transport vehicle manufacturer is currently making adjustments to their assembly line in order to include hot melt body panel adhesives. The adhesive supplier is monitoring the process and offering full technical support to get the new, improved line up and running.

Get connected with an adhesive or sealant supplier

Adhesivesandcoatings.com connects supply and demand in the adhesives and sealants industry through our extensive network. Not only can we offer solutions for transport vehicles, but also cover industries such as packaging, furniture, medical and many more. Contact us and see what we can do to help you find the most suitable adhesives and sealants for your application.


Contact us


Process at adhesives+coatings in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

water based mattress adhesive in a mattress packed in plastic South Africa

Water based mattress adhesive for new factory in South Africa

At AdhesivePlatform we were recently given the honor to help set up a new business by assisting in finding the best adhesive system. A South African mattress manufacturer contacted us enquiring about a water based mattress adhesive to use in their products to be assembled in their new factory.

The new mattress factory focuses on producing sustainable mattresses in an efficient manner. This sets special requirements for the adhesive that bonds together the different layers of the mattresses.

Sustainable, fast curing mattress adhesive for South Africa

The vision of the South African mattress manufacture included water based adhesives and efficient automated packaging – all in one line. The challenge was to find a water based adhesive which dries fast enough – and completely – before the mattresses are rolled up and wrapped in packaging material. Water based adhesives tend to have a rather long curing time and they may cause mold problems if the mattresses are packed too early as some water may still evaporate. Fortunately, our network also includes innovative mattress adhesive manufacturers who could provide the South African company with a solution.

After selecting a mattress adhesive supplier, we shared the project details and adhesive specifications with them. The adhesive manufacturer immediately thought of an adhesive system that would allow for efficient production of mattresses in South Africa.

From testing to mattress production

In this case the advantage was that the adhesive was needed for a new factory granting more freedom to choose the type of adhesive and application method as well as equipment. The needs of the water based adhesive could be considered in the final design of the assembly line.

However, the adhesive still needs to be tested on the mattress materials in order to guarantee outstanding performance. Currently the South African company and adhesive supplier are exchanging specifications and a sample of the mattress adhesive will be sent to South Africa one of these days to carry out testing and proceed to production.

AdhesivePlatform helps finding the right adhesives and sealants

Whether you are looking to switch to another adhesive or sealant or are looking a system for new products, we at AdhesivePlatform are happy to help. Our experts are committed to go the extra mile to land you with the adhesive or sealant system your project or product requires. Contact us and thake the first step towards the solution.


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

bio-based adhesive in natural fiber composite

Canadian biomaterial manufacturer looks for bio-based adhesive

A biomaterial manufacturer, based in Canada, was faced by the challenge of finding a bio-based, preferably compostable or biodegradable adhesive for backing of their natural fiber composite products. They contacted us at adhesives+coatings to ease the search for the right solution.

The biomaterial manufacturer serves the North American market of natural fiber composites used in interiors and consumer products. They were in need of a new bio-based adhesive for a product to be launched shortly. The adhesive they normally used caused significant issues, making it an invalid option. Fortunately, our network included suitable adhesive suppliers capable of solving the problem.

Adhesive specifications and a suitable supplier

The Canadian company was looking for a PSA, low temperature thermoplastic or thermoset adhesive to attach the backing to the natural fiber material. The adhesive needed to be compostable or biodegradable, to support their focus on environmental sustainability. Additionally, the adhesive was ideally applied in a film or web form.

As biodegradable and compostable adhesives are rather new and there are not many certified manufacturers, our options were limited to a couple of members of our network. In order to make the right choice, we needed to know a little more about the required specifications of the adhesive.

Connecting with a bio-based adhesive supplier

After receiving more information on the substrates that required bonding, the available application methods and curing time as well as application and service temperatures, we selected an adhesive supplier within our network and forwarded the enquiry and specifications.

The adhesive manufacturer specializes in water based biodegradable and compostable systems. They had some additional questions to the Canadian company to make sure their products were suitable for the application.

Adhesive testing on the natural fiber composite in Canada

After exchanging details of the materials that require bonding and the possible bonding solution, the Canadian manufacturer and the bio-based adhesive supplier decided to proceed to testing. Currently, the adhesive is being tested on the biomaterial to determine its suitability. Once the results are confirmed, the adhesive is ready to be shipped to Canada.

Get connected through adhesives+coatings

Whether you are seeking adhesives for your new products, looking to challenge your current suppliers or willing to boost production efficiency with another adhesive, we are here to help! Adhesivesandcoatings.com offers personal assistance in finding the perfect bonding and sealing solutions for any application. Send us your enquiry and let us take on the challenge.


Contact us


Process at adhesives+coatings in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

applying epoxy adhesive usa for electronics

An electronics manufacturer from the USA needs a one part epoxy adhesive

A USA based electronics manufacturer contacted us at AdhesivePlatform for assistance in finding a single component epoxy adhesive for bonding two dissimilar metals in electronics. The metal to metal bond needed to be made between aluminum and nickel, preferably with a heat curing epoxy adhesive.

In order to connect this US manufacturer with the most suitable adhesive solution, we requested more information to clarify the product specifications.

Looking for an epoxy adhesive for electronics in the USA

The electronics manufacturer provided us with several criteria such as high shear and peel strength, specific curing time, as well as specified dynamic viscosity and density. Based on these specifications, we started looking for an epoxy adhesive supplier in our network.

After an extensive search we needed to conclude that none of our partners had an existing product which would suit the purpose perfectly. However, our experts contacted a metal adhesive manufacturer to enquire about possibilities for a tailor-made adhesive solution for the American manufacturer. Fortunately, epoxy adhesive formulations can be modified, and making a new glue was a challenge the supplier was willing to take on.

Custom epoxy adhesive for metal to metal bonding in electronics

In this case, the challenge was not bonding dissimilar metals, rather than finding a product that met the very specific requirements. Nevertheless, through AdhesivePlatform, the US electronics manufacturer was successfully brought in touch with an adhesive supplier, who was able to develop an adhesive formulation that resulted in the required epoxy system.

A sample of the possible solution was made, and delivered to the USA for the electronics company to carry out testing on their products. Currently, tests are being done in order to determine whether the system needs further modification.

AdhesivePlatform finds the right solution for your adhesive needs

Even though it might seem that there is no adhesive solution for your application, it is always worth a try to ask around. AdhesivePlatform offers a great opportunity to find a solution for almost any application: if one does not exist yet, it can be made!


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support

sanitary pad with compostable pressure sensitive adhesive india

Indian sanitary pad producer seeks compostable pressure sensitive adhesive

At AdhesivePlatform we received an enquiry for compostable pressure sensitive adhesive from an Indian sanitary pad manufacturer. The company looked for an adhesive solution to stick menstrual pads to underpants. What makes the case special, is that the pads are a 100% compostable, which requires compostability of the adhesive, too.

Finding best compostable PSA adhesive for the manufacturer

In order to connect this Indian manufacturer with the best possible adhesive solution, we needed additional information regarding the sanitary pads, application process and requirements set for the adhesive.

The adhesive is needed for compostable menstrual pads which compose of PLA biopolymer and knitted cotton. After gaining information on the specific application and service temperatures, level of automation of the application process as well as required curing time, we were able to connect the enquiry from India with an adhesive manufacturer who specializes in biodegradable and compostable systems for packaging.

Compostable pressure sensitive adhesive for menstrual pads in India

Even though the adhesive manufacturer specializes in providing compostable solutions for the packaging industry, it was possible to modify one of their pressure sensitive adhesives to suit the needs of the pad manufacturer in India. We connected the two companies with each other, and currently they are running tests on the material and modifying the adhesive to provide the best possible solution which complies with the required standards.

Pressure sensitive adhesive India – increased need for compostable solutions

Compostable and biodegradable adhesive solutions are becoming more and more interesting for many industries world wide. It all started with the packaging industry opting for maximum sustainability and recyclability. However, other industries have followed since: especially hygiene products benefit from compostable adhesives. In India, the demand for compostable solutions is also growing rapidly and new, greener solutions are sought in many industries.

Get the best solution for your product

Connecting supply and demand in the adhesive and sealant industry, we are happy to help out with any enquiries, and look for the most suitable solutions for a wide variety of applications. Do you need an adhesive or sealant or are you interested in learning more about bonding and sealing possibilities for your products? Contact us and let our determined experts find you the right adhesive or sealant solution!


Contact us


Process at AdhesivePlatform in 8 steps

1. Receiving enquiry

2. Collecting information and clarifying specifications

3. Looking for supplier in our database

4. Introducing the client to the potential adhesive or sealant supplier

5. Exchange of technical details between supplier and end-user

6. Sample testing and advise on system specific methods

7. Sales and delivery

8. After Sales and implementation support